Firefox build instructions
- djst
- Moderator
- Posts: 2826
- Joined: November 5th, 2002, 1:34 am
- Location: Sweden
- Contact:
Firefox build instructions
I want to update the download page at Mozilla Firebird (Help) to link to a page with good, step by step instructions for how to build Firebird (and perhaps Thunderbird if the approach is similar). Unfortunately, I'm not very experienced when it comes to building Mozilla in the first place so I would like to hear if someone is up to the task or perhaps could point me to a good page to start with.
I want this page to be on the Mozilla Firebird site. Any help or suggestions on where to get help is greatly appreciated and will probably benefit the community as a whole. Either use email, pm or reply to this thread if you have any ideas. Thanks in advance.
(Title changed by alanjstr 20031211, and by vfwlkr 20040209)
I want this page to be on the Mozilla Firebird site. Any help or suggestions on where to get help is greatly appreciated and will probably benefit the community as a whole. Either use email, pm or reply to this thread if you have any ideas. Thanks in advance.
(Title changed by alanjstr 20031211, and by vfwlkr 20040209)
- DamianMoran
- Posts: 726
- Joined: January 30th, 2003, 10:14 pm
Here is a good resource for Windows: http://gemal.dk/mozilla/build.html
-
- Posts: 0
- Joined: December 31st, 1969, 5:00 pm
I've only just built Firebird and Thunderbird on Linux successfully in the last few days. I did my first succesfull build following the instructions on this page http://forums.mozillazine.org/viewtopic.php?t=17745 . But really that was the last step in a long process. The main thing is, when your build fails at the ./configure stage, read the error messages carefully. Search your hard drive to see if the programs are there but are in an unusual place. Check your Linux CD's to see if the app is on there. Google on the error message. Read. All the information is out there. You can download all the tools for free. It's quicker (and more satisfying) to solve your problems yourself so Google.
- daihard
- Folder@Home
- Posts: 16633
- Joined: November 17th, 2002, 6:27 pm
- Location: Lynnwood, WA
- Contact:
To build Firebird on Linux...
First, make sure you have the following environment variable set:
Second, create the file called ".mozconfig" and save it under your $HOME directory. (It can be saved on other locations, but let's be simple here.) Here's a sample .mozconfig file.
Third, create an empty directory where the source tree will be downloaded. For instance:
Fourth, run the following command from there:
This will create the directory called "mozilla" and the main makefile under the directory. Once it's done, move to that directory:
Fifth, run the following command to download the latest source code from the Internet:
Finally, run the following command to build Firebird for Linux:
The basic Mozilla build instruction for UNIX can be found here:
http://www.mozilla.org/build/unix.html
EDIT: This is my own build script file for Firebird on Linux.
First, make sure you have the following environment variable set:
Code: Select all
CVSROOT=:pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
Second, create the file called ".mozconfig" and save it under your $HOME directory. (It can be saved on other locations, but let's be simple here.) Here's a sample .mozconfig file.
Third, create an empty directory where the source tree will be downloaded. For instance:
Code: Select all
$ mkdir $HOME/fb_source
cd $HOME/fb_source
Fourth, run the following command from there:
Code: Select all
$ cvs co -f mozilla/client.mk
This will create the directory called "mozilla" and the main makefile under the directory. Once it's done, move to that directory:
Code: Select all
$ cd mozilla
Fifth, run the following command to download the latest source code from the Internet:
Code: Select all
gmake -f client.mk checkout
Finally, run the following command to build Firebird for Linux:
Code: Select all
$ gmake -f client.mk build
The basic Mozilla build instruction for UNIX can be found here:
http://www.mozilla.org/build/unix.html
EDIT: This is my own build script file for Firebird on Linux.
Kubuntu 8.04 (kernel 2.6.24-25-generic) / KDE 3.5.10
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
-
- Posts: 119
- Joined: November 13th, 2002, 9:23 pm
daihard wrote:To build Firebird on Linux...
First, make sure you have the following environment variable set:Code: Select all
CVSROOT=:pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
Second, create the file called ".mozconfig" and save it under your $HOME directory. (It can be saved on other locations, but let's be simple here.) Here's a sample .mozconfig file.
Third, create an empty directory where the source tree will be downloaded. For instance:Code: Select all
$ mkdir $HOME/fb_source
cd $HOME/fb_source
Fourth, run the following command from there:Code: Select all
$ cvs co -f mozilla/client.mk
This will create the directory called "mozilla" and the main makefile under the directory. Once it's done, move to that directory:Code: Select all
$ cd mozilla
Fifth, run the following command to download the latest source code from the Internet:Code: Select all
gmake -f client.mk checkout
Finally, run the following command to build Firebird for Linux:Code: Select all
$ gmake -f client.mk build
The basic Mozilla build instruction for UNIX can be found here:
http://www.mozilla.org/build/unix.html
EDIT: This is my own build script file for Firebird on Linux.
Thanks! Where do you put the optimizations in?
-aarem
- daihard
- Folder@Home
- Posts: 16633
- Joined: November 17th, 2002, 6:27 pm
- Location: Lynnwood, WA
- Contact:
aarem wrote:Thanks! Where do you put the optimizations in?
It's in the .mozconfig file. Here's the relevant line:
Code: Select all
ac_add_options --enable-optimize="-O3 -mcpu=pentium4 -msse"
This says optimize as much as possible for Pentium 4 and SSE. "-Ox" tells the level of optimization, with x ranging from 0 (don't optimize) to 3 (optimize most) and s (optimize for size).
Kubuntu 8.04 (kernel 2.6.24-25-generic) / KDE 3.5.10
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
-
- Posts: 5
- Joined: April 20th, 2003, 6:16 am
I cannot seem to get firebird to build. I keep getting this error
ive tried serveral different copies of the source, i want to build my own becuase all the current gtk2 builds segfault on me.
Code: Select all
gmake[2]: Entering directory `/downloads/internet/mozfirebird/mozilla/toolkit'
gmake[2]: *** No rule to make target `export'. Stop.
gmake[2]: Leaving directory `/downloads/internet/mozfirebird/mozilla/toolkit'
gmake[1]: *** [tier_9] Error 2
gmake[1]: Leaving directory `/downloads/internet/mozfirebird/mozilla'
make: *** [default] Error 2
ive tried serveral different copies of the source, i want to build my own becuase all the current gtk2 builds segfault on me.
- Waldo
- Posts: 596
- Joined: July 29th, 2003, 8:21 am
- Location: Cambridge, MA
- Contact:
daihard wrote:To build Firebird on Linux...
First, make sure you have the following environment variable set:Code: Select all
CVSROOT=:pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
Second, create the file called ".mozconfig" and save it under your $HOME directory. (It can be saved on other locations, but let's be simple here.) Here's a sample .mozconfig file.
Third, create an empty directory where the source tree will be downloaded. For instance:Code: Select all
$ mkdir $HOME/fb_source
cd $HOME/fb_source
Fourth, run the following command from there:Code: Select all
$ cvs co -f mozilla/client.mk
This will create the directory called "mozilla" and the main makefile under the directory. Once it's done, move to that directory:Code: Select all
$ cd mozilla
Fifth, run the following command to download the latest source code from the Internet:Code: Select all
gmake -f client.mk checkout
Finally, run the following command to build Firebird for Linux:Code: Select all
$ gmake -f client.mk build
I don't know why, but the cvs co -f mozilla/client.mk command was erroring on me and saying CVSROOT wasn't defined (even though I had run the initial CVSROOT=... command). This is the command I've been able to use (on Mandrake Linux 9.1) to get the initial makefile:
Code: Select all
cvs -f -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot co mozilla/client.mk
After that "gmake -f client.mk checkout" worked fine. For some reason in the earlier stages of the cvs download I was getting warning messages about the file .cvspass not being in the correct location (my /home/waldo/ folder). Any ideas from veteran builders on this? I assume it has something to do with protected folders in the source that are only accessible by the Firebird elite, but maybe I'm wrong. If I'm right, I think some note of this needs to be added to the default UNIX build instructions page - probably the others, too.
I haven't built yet, however, because I assume when I build in Linux I'll get a Linux build by default. This would be nice, but I still primarily use Windows on my computer. How do I make a Windows build in Linux (or does the build process make builds for both)? I've tried getting Cygwin running on my computer to build in Windows XP, but it didn't seem to work, so I gave up and went to Linux where I knew there'd be fewer problems.
P.S.--Regarding build optimizations, I read somewhere recently (some sort of official Firebird build page) that they don't really work on Windows, so the only option there is --enable-optimize. Or maybe you could talk to the makers of the optimized nightlies that seem to show up here and see what they say.
- mtigas
- Posts: 430
- Joined: August 11th, 2003, 8:04 pm
- Contact:
Oh man. Those build instructions are great. I did a few things differently, but it looks to be good. I'm pulling the source now.
It's so terrible. I'm such a newb at this. This sounds like it'll be fun.
If it goes well, then I simply don't know what to say. Awesome.
It's so terrible. I'm such a newb at this. This sounds like it'll be fun.
If it goes well, then I simply don't know what to say. Awesome.
- daihard
- Folder@Home
- Posts: 16633
- Joined: November 17th, 2002, 6:27 pm
- Location: Lynnwood, WA
- Contact:
Waldo wrote:I don't know why, but the cvs co -f mozilla/client.mk command was erroring on me and saying CVSROOT wasn't defined (even though I had run the initial CVSROOT=... command). This is the command I've been able to use (on Mandrake Linux 9.1) to get the initial makefile:Code: Select all
cvs -f -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot co mozilla/client.mk
You may need to export the variable instead of just setting it; i.e. run the command as follows:
Code: Select all
CVSROOT=:pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot; export CVSROOT
That's what I do in my .bashrc file so each time I open a terminal, the variable gets defined automatically.
Waldo wrote:After that "gmake -f client.mk checkout" worked fine. For some reason in the earlier stages of the cvs download I was getting warning messages about the file .cvspass not being in the correct location (my /home/waldo/ folder).
The first time you access CVS, you need to run the following command and type "anonymous" as your password when prompted:
Code: Select all
cvs login
This will create .cvspass under your home directory. Sorry that I missed that part in my instructions.
Waldo wrote:I haven't built yet, however, because I assume when I build in Linux I'll get a Linux build by default. This would be nice, but I still primarily use Windows on my computer. How do I make a Windows build in Linux (or does the build process make builds for both)? I've tried getting Cygwin running on my computer to build in Windows XP, but it didn't seem to work, so I gave up and went to Linux where I knew there'd be fewer problems.
I don't think you can build the Windows version of Firebird using Linux. The Linux binaries aren't compatible with the Win32 binaries, and AFAIK, the compiler on Linux (gcc) doesn't produce Win32 binaries.
Waldo wrote:P.S.--Regarding build optimizations, I read somewhere recently (some sort of official Firebird build page) that they don't really work on Windows, so the only option there is --enable-optimize. Or maybe you could talk to the makers of the optimized nightlies that seem to show up here and see what they say.
It's mainly the problem with either MingW (gcc that comes with cygwin) or Visual Studio 6. You can optimize Firebird without any problem if you use a newer compiler such as Visual Studio .NET 2002.
Kubuntu 8.04 (kernel 2.6.24-25-generic) / KDE 3.5.10
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
- daihard
- Folder@Home
- Posts: 16633
- Joined: November 17th, 2002, 6:27 pm
- Location: Lynnwood, WA
- Contact:
mondaypickle wrote:I cannot seem to get firebird to build. I keep getting this errorCode: Select all
gmake[2]: Entering directory `/downloads/internet/mozfirebird/mozilla/toolkit'
gmake[2]: *** No rule to make target `export'. Stop.
gmake[2]: Leaving directory `/downloads/internet/mozfirebird/mozilla/toolkit'
gmake[1]: *** [tier_9] Error 2
gmake[1]: Leaving directory `/downloads/internet/mozfirebird/mozilla'
make: *** [default] Error 2
ive tried serveral different copies of the source, i want to build my own becuase all the current gtk2 builds segfault on me.
There may be more than one reason for that error. Run "make export" from your build root directory (<path_to_your_build>/mozilla) and then run your build procedure again.
Kubuntu 8.04 (kernel 2.6.24-25-generic) / KDE 3.5.10
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
- nilson
- Posts: 4100
- Joined: February 15th, 2003, 11:55 pm
- Location: Tuscaloosa, Alabama
- Contact:
- daihard
- Folder@Home
- Posts: 16633
- Joined: November 17th, 2002, 6:27 pm
- Location: Lynnwood, WA
- Contact:
nilson wrote:Don't forget mine : http://home.earthlink.net/~nilsoncain/tutorials/build_firebird.html
Wow, this page looks awesome! Did you create it manually or with a program? I've been kinda tweaking my Web site lately, but it's nowhere as great as yours... Great job!
Kubuntu 8.04 (kernel 2.6.24-25-generic) / KDE 3.5.10
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
CentOS 4.8 (kernel 2.6.9-78.0.22.ELsmp) / KDE 3.5.10
Mac OS X 10.6.1 (Snow Leopard) / iPhone 3GS (32GB black)
- nilson
- Posts: 4100
- Joined: February 15th, 2003, 11:55 pm
- Location: Tuscaloosa, Alabama
- Contact:
-
- Posts: 26
- Joined: December 31st, 1969, 5:00 pm
- Location: On a train
I can't believe nobody has mentioned http://lxr.mozilla.org/mozilla/source/b ... EADME.html yet!