github.com error

Discussion of general topics about Seamonkey
skuwakin
Posts: 7
Joined: October 2nd, 2022, 8:34 am

github.com error

Post by skuwakin »

Hi.
https://github.com/Jackett/Jackett/rele ... v0.20.1024
In seamonkey 2.53.14
https://disk.yandex.ru/i/4bsO_lcROL3NTQ
in edge
https://disk.yandex.ru/i/4c_ceMaoM9ypKA

Changing the user-agent for github.com using about:config didn't help....
User avatar
Frank Lion
Posts: 21173
Joined: April 23rd, 2004, 6:59 pm
Location: ... The Exorcist....United Kingdom
Contact:

Re: github.com error

Post by Frank Lion »

skuwakin wrote:Hi. .. didn't help....
Hi, this will help though - http://forums.mozillazine.org/viewtopic ... #p14940052
"The only thing necessary for the triumph of evil, is for good men to do nothing." - Edmund Burke (attrib.)
.
skuwakin
Posts: 7
Joined: October 2nd, 2022, 8:34 am

Re: github.com error

Post by skuwakin »

Frank Lion wrote: Hi, this will help though - http://forums.mozillazine.org/viewtopic ... #p14940052
Thank you very much! It's working!
4td8s
Posts: 784
Joined: June 24th, 2009, 1:07 pm

Re: github.com error

Post by 4td8s »

github site problem also happens in Palemoon as well
so it's happening in both Seamonkey and Palemoon browsers
need to install the proper addons for the affected SM & PM browsers to fix the problem
4td8s
Posts: 784
Joined: June 24th, 2009, 1:07 pm

Re: github.com error

Post by 4td8s »

or install the latest version of Palefill for both Palemoon & SM :)
Anonymosity
Posts: 8779
Joined: May 7th, 2007, 12:07 pm

Re: github.com error

Post by Anonymosity »

The latest version of Palefill works with Pale Moon, but not with SeaMonkey. I had to revert to version 1.23 for SeaMonkey.
rainyd
Posts: 46
Joined: November 14th, 2008, 1:22 pm

Re: github.com error

Post by rainyd »

Anonymosity wrote:The latest version of Palefill works with Pale Moon, but not with SeaMonkey. I had to revert to version 1.23 for SeaMonkey.
No, it works, however it requires to reload page via F5, version 1.24 works very well.
4td8s
Posts: 784
Joined: June 24th, 2009, 1:07 pm

Re: github.com error

Post by 4td8s »

rainyd wrote:
Anonymosity wrote:The latest version of Palefill works with Pale Moon, but not with SeaMonkey. I had to revert to version 1.23 for SeaMonkey.
No, it works, however it requires to reload page via F5, version 1.24 works very well.
does 1.26 work well on your end for SM, rainyd?
rainyd
Posts: 46
Joined: November 14th, 2008, 1:22 pm

Re: github.com error

Post by rainyd »

4td8s wrote: does 1.26 work well on your end for SM, rainyd?
Yes, it works but again is necessary to reload page using F5.
TPR75
Posts: 1352
Joined: July 25th, 2011, 8:11 am
Location: Poland

Re: github.com error

Post by TPR75 »

rainyd wrote:
4td8s wrote: does 1.26 work well on your end for SM, rainyd?
Yes, it works but again is necessary to reload page using F5.
Does this issue works for you?
https://github.com/martok/palefill/issues/70

I tried SM 2.53.15 with Palefill 1.26 and it's not working.

Some basic fixes (like showing Assets) are working but other depends on fixes (e.g. RegExp) not present in SeaMonkey (yet, I hope).
--
rainyd
Posts: 46
Joined: November 14th, 2008, 1:22 pm

Re: github.com error

Post by rainyd »

TPR75 wrote: Does this issue works for you?
https://github.com/martok/palefill/issues/70

I tried SM 2.53.15 with Palefill 1.26 and it's not working.

Some basic fixes (like showing Assets) are working but other depends on fixes (e.g. RegExp) not present in SeaMonkey (yet, I hope).
That page looks normal to me, unfortunately, I don't know how to make a whole screenshot of it while using SM.

Btw, I'm using beta version of SM 2.53.16 (build from 6th February).
TPR75
Posts: 1352
Joined: July 25th, 2011, 8:11 am
Location: Poland

Re: github.com error

Post by TPR75 »

rainyd wrote:
TPR75 wrote: Does this issue works for you?
https://github.com/martok/palefill/issues/70
That page looks normal to me, unfortunately, I don't know how to make a whole screenshot of it while using SM.
Open above URL/link and there is explained what to do:
1) open website where problem is:
https://github.com/ossrs/srs-cloud#architecture
Under 2.53.15 it goes directly to "architecture" section but for some reason under 2.53.16 (20230214220004) it opens top of the page so user must scroll down a little.
2) for me two diagrams are not loading and after some time there is error message: "Unable to render rich display"
3) example how it should look you can see on issue page: pt. no. 2 "Expected result".

So, can you see diagrams or error message only?
--
rainyd
Posts: 46
Joined: November 14th, 2008, 1:22 pm

Re: github.com error

Post by rainyd »

TPR75 wrote: So, can you see diagrams or error message only?
No, I'm getting the same message: "Unable to render rich display"
4td8s
Posts: 784
Joined: June 24th, 2009, 1:07 pm

Re: github.com error

Post by 4td8s »

this github problem is no longer limited to just Seamonkey alone anymore.

even K-meleon also has the github site problem (links below the "Assets" section won't load) but the fix/workaround that worked with Seamonkey 2.53.x doesn't work with K-meleon (and also doesn't work with Seamonkey 2.57.x builds from wg9s)
EPhantom
Posts: 3
Joined: January 25th, 2024, 2:40 am

Re: github.com error

Post by EPhantom »

Using the latest Seamonkey 2.53.18.1
Last week I noticed that Github pages again were broken.
"Code" page doesn't show project's files directory and "Releases" page doesn't show assets.
Earlier "toggling webcomponents" trick doesn't help anymore.

Any advice?
Post Reply