I'm on my second router that will not allow me to send email messages from my Windows 7 desktop computer, using SeaMonkey Portable 2.49.3. Internet browsing is fine as is receiving emails. Without the router, the outgoing emails work fine. My ISP is Spectrum, who essentially said I'm on my own.
This is a LinkSys EA6400. I've added port 587 to port forwarding, without success. I had very similar problems with a Belkin last week and they could not come to a solution.
Anyone have any ideas how to correct?
Thanks for any info.
Can't Send Email With Router
-
- Posts: 220
- Joined: April 19th, 2004, 5:24 pm
- Location: Lake County, FL
-
- Posts: 1353
- Joined: July 25th, 2011, 8:11 am
- Location: Poland
Re: Can't Send Email With Router
For outgoing messages (SMTP server) default port is 465 (with SSL connection security):wpr wrote:This is a LinkSys EA6400. I've added port 587 to port forwarding, without success.
--
-
- Posts: 220
- Joined: April 19th, 2004, 5:24 pm
- Location: Lake County, FL
Re: Can't Send Email With Router
Thank you, but the settings you showed are for a gmail server, not a Spectrum server. I did try them, though, and they did not work.
-
- Posts: 1353
- Joined: July 25th, 2011, 8:11 am
- Location: Poland
Re: Can't Send Email With Router
It was graphical example of port number 465 (default for SMTP with SSL/TLS).wpr wrote:Thank you, but the settings you showed are for a gmail server, not a Spectrum server.
You don't have problems with SeaMonkey...
... you have problem with your router.wpr wrote:Without the router, the outgoing emails work fine.
Port forwarding:wpr wrote:This is a LinkSys EA6400. I've added port 587 to port forwarding, without success.
https://www.linksys.com/us/support-arti ... 138784#SF6
https://www.linksys.com/qa/support-arti ... Num=140223
As far as I understand you will use port forwarding when you'll have server in your network and it should be accessible from outside:
https://en.wikipedia.org/wiki/Port_forwarding
But for some (unknown to me) reasons LinkSys has other meaning for PF:
https://portforward.com/linksys/ea6500/
If you want just to sent e-mail messages then open port 465 in your router's firewall. Or port 587 like for your ISP:
https://www.spectrum.net/support/intern ... nce-guide/
Check settings for your another router and compare it with this (problematic) one.
Some example of configuration for your router:
https://www.hmailserver.com/forum/viewt ... 80#p172986
Last edited by TPR75 on May 20th, 2018, 4:24 am, edited 1 time in total.
--