[FX] PowerBook: 2005-07-16 [Trunk/OS X] (G4, O3, Altivec)
-
- Posts: 39
- Joined: September 17th, 2003, 10:10 am
- krmathis
- Posts: 4699
- Joined: May 24th, 2004, 9:40 pm
- Location: Oslo, Norway
- Contact:
- krmathis
- Posts: 4699
- Joined: May 24th, 2004, 9:40 pm
- Location: Oslo, Norway
- Contact:
-
- Posts: 2
- Joined: February 19th, 2005, 5:56 pm
- Location: Edinburgh, Scotland
- Contact:
- krmathis
- Posts: 4699
- Joined: May 24th, 2004, 9:40 pm
- Location: Oslo, Norway
- Contact:
mgdm. Welcome to the MozillaZine forum.
Please share your 1.0.1 nightly branch build. I've got a request for it myself, but I will not compile 1.0.1 before it goes final.
So I'm sure there are users wanting to test it.
MozJF. You are correct, about: does not work. But you could use "Firefox > About Mozilla Firefox" instead.
The other about commands (about:config, about:buildconfig, about:plugins etc...) works fine in my 0219 build. about commands.
Hope you find a suitable artwork.
Edit:
02/20 build out.
Please share your 1.0.1 nightly branch build. I've got a request for it myself, but I will not compile 1.0.1 before it goes final.
So I'm sure there are users wanting to test it.
MozJF. You are correct, about: does not work. But you could use "Firefox > About Mozilla Firefox" instead.
The other about commands (about:config, about:buildconfig, about:plugins etc...) works fine in my 0219 build. about commands.
Hope you find a suitable artwork.
Edit:
02/20 build out.
- krmathis
- Posts: 4699
- Joined: May 24th, 2004, 9:40 pm
- Location: Oslo, Norway
- Contact:
- krmathis
- Posts: 4699
- Joined: May 24th, 2004, 9:40 pm
- Location: Oslo, Norway
- Contact:
-
- Posts: 2
- Joined: February 23rd, 2005, 6:06 am
- Location: Paris (France)
- Contact:
Some issues I got :
- Tab switching don't work (with the new arrow shortcut) - actually I didn't find any shortcut for previous/next tab. Tab switching via Ctrl-cmd-[0-9] works though.
- Mark all as read don't work in sage since ages (bug reported to them, they turned it to FF)
- Sometime Cmd-w don't close a tab, one have to go in the menu or click on the close button in the tab bar
- Tab switching don't work (with the new arrow shortcut) - actually I didn't find any shortcut for previous/next tab. Tab switching via Ctrl-cmd-[0-9] works though.
- Mark all as read don't work in sage since ages (bug reported to them, they turned it to FF)
- Sometime Cmd-w don't close a tab, one have to go in the menu or click on the close button in the tab bar
-
- Posts: 2
- Joined: February 23rd, 2005, 9:55 am
- Location: San Francisco, California
- Contact:
Thank you very, very much for making these available. It's really appreciated.
Build the 18th worked for me, since then I get a couple of bounces and bupkis.
Before I flail about I was hoping to have someone tell me that there's a simple fix for this, like an incompatibility with an old profile format or somesuch.
This is under 10.3.8, latest patches, TiPB, with hot steaming coffee in hand.
Oh, and is there a place to beg features from the folks doing the Mac-centric work? For example, I'd like new windows to open n pixels to the right, but zero pixels down. Amongst others.
Build the 18th worked for me, since then I get a couple of bounces and bupkis.
Before I flail about I was hoping to have someone tell me that there's a simple fix for this, like an incompatibility with an old profile format or somesuch.
This is under 10.3.8, latest patches, TiPB, with hot steaming coffee in hand.
Oh, and is there a place to beg features from the folks doing the Mac-centric work? For example, I'd like new windows to open n pixels to the right, but zero pixels down. Amongst others.
- krmathis
- Posts: 4699
- Joined: May 24th, 2004, 9:40 pm
- Location: Oslo, Norway
- Contact:
@MathieuMa. Can you verify that its working with the official nightly trunk build?
Meaning, is is really caused by my G4 optimization or is it a source problem out of my control.
@SinceEBCDIC. I have had no problems with the latest builds myself, so I'm pretty sure its a problem on your side.
I suggest you backup and delete your current profile, then fire up the latest build to create a new one.
The profile is located in: ~/Library/Application Support/Firefox/
Hopefully that fix it...
Talk about and request features in this forum.
02/23 build out.
Meaning, is is really caused by my G4 optimization or is it a source problem out of my control.
@SinceEBCDIC. I have had no problems with the latest builds myself, so I'm pretty sure its a problem on your side.
I suggest you backup and delete your current profile, then fire up the latest build to create a new one.
The profile is located in: ~/Library/Application Support/Firefox/
Hopefully that fix it...
Talk about and request features in this forum.
02/23 build out.
-
- Posts: 2
- Joined: February 23rd, 2005, 9:55 am
- Location: San Francisco, California
- Contact:
- krmathis
- Posts: 4699
- Joined: May 24th, 2004, 9:40 pm
- Location: Oslo, Norway
- Contact:
^ As it starts normally with a fresh profile there is not much more I can help out with.
You need to locate what extension, tool etc. that breaks the build and post about it in the Bugs forum.
Trunk is the burning edge, so it sometimes breaks compatibility with themes and extensions!
You need to locate what extension, tool etc. that breaks the build and post about it in the Bugs forum.
Trunk is the burning edge, so it sometimes breaks compatibility with themes and extensions!