Modded Extensions for SeaMonkey
- therube
- Posts: 21698
- Joined: March 10th, 2004, 9:59 pm
- Location: Maryland USA
Re: Modded Extensions for SeaMonkey
For a long time now, every so often, I have had trouble with SeaMonkey declaring JSView to be incompatible & disabling it.
The latest time was today, when I updated Aurora with it's latest .mar.
When it happened the time before, I removed JSView, then reinstalled it, figuring that something could have been screwy with my Profile, & it could very well be a Profile issue (there being many extension inter-related files that are used).
In the past I would also set a Preference like user_pref("extensions.checkCompatibility.2.14a", false);, but I figure we are past the times when doing so should be necessary.
Yet every now & again, JSView is not liked, & it is only JSView that this happens to.
Ideas?
The latest time was today, when I updated Aurora with it's latest .mar.
When it happened the time before, I removed JSView, then reinstalled it, figuring that something could have been screwy with my Profile, & it could very well be a Profile issue (there being many extension inter-related files that are used).
In the past I would also set a Preference like user_pref("extensions.checkCompatibility.2.14a", false);, but I figure we are past the times when doing so should be necessary.
Yet every now & again, JSView is not liked, & it is only JSView that this happens to.
Ideas?
Fire 750, bring back 250.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
-
- Posts: 20
- Joined: June 28th, 2011, 1:47 am
- Location: Minsk, Belarus
Re: Modded Extensions for SeaMonkey
xed wrote:Can Dr.Web LinkChecker be modded to work with SeaMonkey?
It used to work with it, I'm pretty sure, but it can't be installed anymore.
It's a nice security enhancement and I would definitely install it if it were made available.
Thanks.
works maximum on platform version 15.0.1, this firefox 15.0.1 and Seamonkey 2.12.1
version after >15.0.1 not work (tested), need update from author.
try this drweb-2.7.4-fn+fx+tb+sm.xpi work
Last edited by Farby on November 1st, 2012, 5:02 am, edited 1 time in total.
Life sometimes throws this what you want to find ...
- therube
- Posts: 21698
- Joined: March 10th, 2004, 9:59 pm
- Location: Maryland USA
Re: Modded Extensions for SeaMonkey
> works maximum on platform version 15.0.1, this firefox 15.0.1 and Seamonkey 2.12.1
> version after >15.0.1 not work (tested), need update from author.
Wonder why that is?
Yes, it does work in 2.12.1.
Kind of works in > 2.12.1
The UI seems to all be there. Options work & what not.
Only it never completes an actual scan (never returns results), so not of much value.
So the changes...
what was that, something that Mozilla did, necessitating that change?
> version after >15.0.1 not work (tested), need update from author.
Wonder why that is?
Yes, it does work in 2.12.1.
Kind of works in > 2.12.1
The UI seems to all be there. Options work & what not.
Only it never completes an actual scan (never returns results), so not of much value.
So the changes...
Code: Select all
Cc to Components.classes
Ci to Components.interfaces
what was that, something that Mozilla did, necessitating that change?
Fire 750, bring back 250.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
-
- Posts: 48
- Joined: March 27th, 2010, 9:49 am
Re: Modded Extensions for SeaMonkey
SM 2.13.2
Installing/reinstalling Statusbar Clock timestatus-1.7.1-mod.xpi and try to access it's options in Add-ons Manager makes SM to freeze(!). It did work under SM 2.12. Probably even under SM 2.13.0.
Has anyone else experienced that?
TIA
Installing/reinstalling Statusbar Clock timestatus-1.7.1-mod.xpi and try to access it's options in Add-ons Manager makes SM to freeze(!). It did work under SM 2.12. Probably even under SM 2.13.0.
Has anyone else experienced that?
TIA
- Philip Chee
- Posts: 6475
- Joined: March 1st, 2005, 3:03 pm
- Contact:
Re: Modded Extensions for SeaMonkey
Retep8 wrote:SM 2.13.2
Installing/reinstalling Statusbar Clock timestatus-1.7.1-mod.xpi and try to access it's options in Add-ons Manager makes SM to freeze(!). It did work under SM 2.12. Probably even under SM 2.13.0.
Has anyone else experienced that?
TIA
OK I see what happened. I've updated it for current versions of SeaMonkey. Same download link. To be safe wait a couple of hours for the mirrors to synchronize.
http://downloads.mozdev.org/xsidebar/mods/timestatus-1.7.1-mod.xpi
Changes:
1. Added a chrome.manifest file.
2. Changed <popup> to <menupopup> to avoid transparent popup menus :S
Phil
-
- Posts: 48
- Joined: March 27th, 2010, 9:49 am
Re: Modded Extensions for SeaMonkey
That worked out well, Philip.
Thanks
Peter
Thanks
Peter
-
- Posts: 48
- Joined: March 27th, 2010, 9:49 am
Re: Modded Extensions for SeaMonkey
An other matter, and may be it's not the right place here, but I don't know better. I have to sync 3 PCs (two of them with XPPro and one with Win7Pro). With SM 2.13.2 installed.
I had to abandon the sync function cause it messed up the bookmarks, extensions/add-ons and passwords, and have to use a sync program (GoodSync), with which, for proper results, I carefully have to select individual profile files.
Resetting sync on all three and appointing one PC as the master, saved me from loosing bookmarks and passwords, however I had to reinstall all extensions/add-ons on the two other PCs, with hours of work involved.
Are you happy with the sync function?
I had to abandon the sync function cause it messed up the bookmarks, extensions/add-ons and passwords, and have to use a sync program (GoodSync), with which, for proper results, I carefully have to select individual profile files.
Resetting sync on all three and appointing one PC as the master, saved me from loosing bookmarks and passwords, however I had to reinstall all extensions/add-ons on the two other PCs, with hours of work involved.
Are you happy with the sync function?
- xed
- Posts: 669
- Joined: February 11th, 2007, 12:04 pm
Re: Modded Extensions for SeaMonkey
Farby wrote:xed wrote:Can Dr.Web LinkChecker be modded to work with SeaMonkey?
It used to work with it, I'm pretty sure, but it can't be installed anymore.
It's a nice security enhancement and I would definitely install it if it were made available.
Thanks.try this drweb-2.7.0-fn+fx+tb+sm.xpi
works maximum on platform version 15.0.1, this firefox 15.0.1 and Seamonkey 2.12.1
version after >15.0.1 not work (tested), need update from author.
try this drweb-2.7.4-fn+fx+tb+sm.xpi work
Thank you. That newest version seems to work. I appreciate your work very much. I will use this until Dr. Web comes out with an update to work with SeaMonkey, or as long as it works with new versions of SeaMonkey.
I have put in a request at the Dr. Web site for them to make their extension compatible with SeaMonkey. I was very polite and I hope other people might petition them in a nice way to get them to cooperate.
Here is a nice extension that works with SeaMonkey, but is not listed as such:
eCleaner
It gets rid of leftover about:config entries from extension uninstallations that don't clean up after themselves very well.
"Doin' right ain't got no end." Cap'n Red Legs
- therube
- Posts: 21698
- Joined: March 10th, 2004, 9:59 pm
- Location: Maryland USA
Re: Modded Extensions for SeaMonkey
(xsidebar) FullerScreen needs a version bump.
I've done (only that) here, http://www.filesplat.com/.therube/share ... 20Copy.xpi, so feel free to bump your 2.3.3 or grab mine (its good to SeaMonkey 2.99.* ).
I've done (only that) here, http://www.filesplat.com/.therube/share ... 20Copy.xpi, so feel free to bump your 2.3.3 or grab mine (its good to SeaMonkey 2.99.* ).
Fire 750, bring back 250.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
- therube
- Posts: 21698
- Joined: March 10th, 2004, 9:59 pm
- Location: Maryland USA
Re: Modded Extensions for SeaMonkey
img2tab works with a couple simple changes.
I've sent the fellow an email asking him to support SeaMonkey.
I've sent the fellow an email asking him to support SeaMonkey.
Code: Select all
install.rdf:
<!-- SeaMonkey -->
<em:targetApplication>
<Description>
<em:id>{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}</em:id>
<em:minVersion>2.0</em:minVersion>
<em:maxVersion>2.16a1</em:maxVersion>
</Description>
</em:targetApplication>
chrome.manifest:
overlay chrome://navigator/content/navigator.xul chrome://img2tab/content/img2tab.xul
Fire 750, bring back 250.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
- xed
- Posts: 669
- Joined: February 11th, 2007, 12:04 pm
Re: Modded Extensions for SeaMonkey
For some reason Make Link has stopped working in SeaMonkey 2.14. I tried reinstalling it from your modded extensions page but no help.
"Doin' right ain't got no end." Cap'n Red Legs
-
- Posts: 20
- Joined: June 28th, 2011, 1:47 am
- Location: Minsk, Belarus
Re: Modded Extensions for SeaMonkey
xed wrote:For some reason Make Link has stopped working in SeaMonkey 2.14. I tried reinstalling it from your modded extensions page but no help.
may be work new mod - make_link-11.03-fx+sm.xpi
Life sometimes throws this what you want to find ...
- xed
- Posts: 669
- Joined: February 11th, 2007, 12:04 pm
Re: Modded Extensions for SeaMonkey
Farby wrote:xed wrote:For some reason Make Link has stopped working in SeaMonkey 2.14. I tried reinstalling it from your modded extensions page but no help.
may be work new mod - make_link-11.03-fx+sm.xpi
Yes, thanks, that seems to work fine. I appreciate your work!
Modded Extensions for SeaMonkey • mozillaZine Forums
"Doin' right ain't got no end." Cap'n Red Legs
- therube
- Posts: 21698
- Joined: March 10th, 2004, 9:59 pm
- Location: Maryland USA
Re: Modded Extensions for SeaMonkey
Bookmarks menu 1.4
An install section, a change to a chrome entry, & with those mods, looks to work in SeaMonkey: http://www.filesplat.com/.therube/share ... 20Copy.xpi
An install section, a change to a chrome entry, & with those mods, looks to work in SeaMonkey: http://www.filesplat.com/.therube/share ... 20Copy.xpi
Fire 750, bring back 250.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.19) Gecko/20110420 SeaMonkey/2.0.14 Pinball CopyURL+ FetchTextURL FlashGot NoScript
-
- Posts: 319
- Joined: October 18th, 2004, 9:47 am
Re: Modded Extensions for SeaMonkey
scrapbook-1.3.7-mod.xpi in last versions of SeaMonkey.
Doesn't work in Editor:
-Remove the selection
-Highlighter
-Outline in Dom Erasier
For fixing Outline - in editor.js I replaced "elem.style.MozOutline" to "elem.style.outline".
(I use scrapbook only for editing pages before saving in File - Save as.)
Doesn't work in Editor:
-Remove the selection
-Highlighter
-Outline in Dom Erasier
For fixing Outline - in editor.js I replaced "elem.style.MozOutline" to "elem.style.outline".
(I use scrapbook only for editing pages before saving in File - Save as.)