[FX] elfurbe: Nightly [Branch|Trunk/OSX] (G3/G4/G5/Intel)
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
Hm. That's probably what I'd do. Sometimes these nightlies can wreak havoc in the profile folder.
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
2005.07.29
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
I compile all with -O3, and I use altivec and auto-vectorization where applicable, and that's it. I played with lots of other options when I started, but I've found those to be good enough.
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
2005.07.31
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
2005.08.01
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
Had some trouble building for 08.02, seems to be rectified today.
2005.08.03
2005.08.03
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
-
- Posts: 607
- Joined: April 14th, 2005, 4:32 am
- Location: Australia
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
You'll have a 7400 compatible.
http://www.everymac.com/systems/apple/p ... index.html
or, if you're really into understanding it:
http://www.freescale.com/webapp/sps/sit ... H3bTdG8653
I won't pretend to understand the nature of the whole thing, but 7450, 7455, 7457, 7447/a are the ones that get benefit from the "7450" gcc option and 7410 and 7440 gain with the "7400" option. Your Ti 550 does have a 7440, so you'll want the 7400 version.
Methinks.
http://www.everymac.com/systems/apple/p ... index.html
or, if you're really into understanding it:
http://www.freescale.com/webapp/sps/sit ... H3bTdG8653
I won't pretend to understand the nature of the whole thing, but 7450, 7455, 7457, 7447/a are the ones that get benefit from the "7450" gcc option and 7410 and 7440 gain with the "7400" option. Your Ti 550 does have a 7440, so you'll want the 7400 version.
Methinks.
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
-
- Posts: 607
- Joined: April 14th, 2005, 4:32 am
- Location: Australia
mento wrote:This post used to be a duplicate of the one above it, but now it's just a useless piece of nothing.
LOL!
Thanks. 7450 optimization it is then...
Offtopic: Man, there is such a big difference going from a PMG5 dual 2GHz to a TiBookG4 550MHz. But I can't complain since it is a free hand-me-down. I only have to pay to upgrade the RAM from 256MB to 768MB!
Ontopic: elfurbe, you might want to put up a FAQ about which of your builds on which machines...
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
I bow to your authority, mento.
As to the FAQ, that's not a bad plan. Maybe I'll add a bit to the webpage explaining which builds go with which machines.
As to the FAQ, that's not a bad plan. Maybe I'll add a bit to the webpage explaining which builds go with which machines.
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
2005.08.04
The first triumph of my totally automated build system! Getting the cron to work was a pain, but last night it kicked up the jams. Viva el cron!
So, hopefully, you (that's an all-inclusive you representing anyone who would want to download my builds) can expect regular nightly updates, rather than the sporadically timed builds I've been performing.
The first triumph of my totally automated build system! Getting the cron to work was a pain, but last night it kicked up the jams. Viva el cron!
So, hopefully, you (that's an all-inclusive you representing anyone who would want to download my builds) can expect regular nightly updates, rather than the sporadically timed builds I've been performing.
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
- elfurbe
- Posts: 447
- Joined: May 24th, 2004, 9:48 am
- Location: Tucson, AZ
- Contact:
Added an FAQ and my mozconfig to my top post. Hopefully it answers the questions properly.
My Thread: G3/G4/Intel Optimized Trunk Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds
Mac Thread: MacOSX Builders Thread
My Site: Mac Community Builds