What you refer to sounds like the outdated listing at <a href="http://www.extensionsmirror.nl/index.php?showtopic=254">The Extensions Mirror</a> and not <a href="http://mozilla.dorando.at/readme.html">my page</a> indicated there and in the extension...Jim001 wrote:I was able to get the extension at the bottom of your page working - the one that says is from Onemen. When I try to install your extension, I get a box that says that it is only compatible with version up to 1.5. I'm running 1.5.0.3.
keyconfig 20110522
-
- Posts: 1203
- Joined: January 9th, 2004, 9:57 am
- Contact:
Re: Keyconfig Extension
-
- Posts: 375
- Joined: September 13th, 2004, 2:02 pm
I would like to change the shortcut for Send email now button.
There's no option in keyconfig.
How can I add this shorcut?
Would llike to add as well these shorcuts:
CTRL-0 select inbox folder
CTRL-1 select sent folder
CTRL-2 select trash folder
CTRL-3 select drafs folder
Same stuff for Add Attachment (CTRL-H).
Is the CTRL-M shortcut not available in Keyconfig?
There's no option in keyconfig.
How can I add this shorcut?
Would llike to add as well these shorcuts:
CTRL-0 select inbox folder
CTRL-1 select sent folder
CTRL-2 select trash folder
CTRL-3 select drafs folder
Same stuff for Add Attachment (CTRL-H).
Is the CTRL-M shortcut not available in Keyconfig?
-
- Posts: 1203
- Joined: January 9th, 2004, 9:57 am
- Contact:
This is listed as 'Send Now', be aware that you need to select the Compose window via right-click to edit shortcuts there.reevuur wrote:I would like to change the shortcut for Send email now button.
There's no option in keyconfig.
<code>SelectFolder('folderURI');</code>reevuur wrote:Would [like] to add as well these shorcuts:
[...] select [...] folder
The defult URIs should be <code>mailbox://nobody@Local%20Folders/<i><u>Folder</u></i></code> but it is also possible to get the folderURI by using:
<code>prompt("",gMsgFolderSelected.Value);</code>
or
<code>prompt("",gDBView.msgFolder.Value);</code>
<code>goDoCommand('cmd_attachFile');</code>reevuur wrote:Same stuff for Add Attachment (CTRL-H).
Listed as 'New Message' in the main window.reevuur wrote:Is the CTRL-M shortcut not available in Keyconfig?
-
- Posts: 375
- Joined: September 13th, 2004, 2:02 pm
Thank you very much dorando for your clear answer!
I have inserted this command to select the inbox:
SelectFolder('mailbox://nobody@Local%20Folders/Inbox');
and all works fine.
I do not understand what to do with the
prompt("",gMsgFolderSelected.Value); and the
prompt("",gDBView.msgFolder.Value); command
Both gives this Prompt box mailbox://nobody@Local%20Folders/Sent
if I have the Sent folder selected.
Other thing:
Keyconfig doesn't let me use the CTRL-M shorcut (with no command/key).
I have inserted this command to select the inbox:
SelectFolder('mailbox://nobody@Local%20Folders/Inbox');
and all works fine.
I do not understand what to do with the
prompt("",gMsgFolderSelected.Value); and the
prompt("",gDBView.msgFolder.Value); command
Both gives this Prompt box mailbox://nobody@Local%20Folders/Sent
if I have the Sent folder selected.
Other thing:
Keyconfig doesn't let me use the CTRL-M shorcut (with no command/key).
-
- Posts: 1203
- Joined: January 9th, 2004, 9:57 am
- Contact:
This code is for getting the folderURI of the current selected folder as it is not always guessable.reevuur wrote:I do not understand what to do with the
prompt("",gMsgFolderSelected.Value); and the
prompt("",gDBView.msgFolder.Value); command
Both gives this Prompt box mailbox://nobody@Local%20Folders/Sent
if I have the Sent folder selected.
Not sure what you mean but I'm able to assign this shortcut to other functions. Be sure to disable/change the default function which has Ctrl+M assigned before assigning it to something different.reevuur wrote:Keyconfig doesn't let me use the CTRL-M shorcut (with no command/key).
-
- Posts: 1203
- Joined: January 9th, 2004, 9:57 am
- Contact:
-
- Posts: 1203
- Joined: January 9th, 2004, 9:57 am
- Contact:
I actually meant what happens if you press Ctrl+M in the main window, but that sounds like something at OS level or another app captures that keypress and it doesn't reach keyconfig, so there isn't anything I can do about it.
Last edited by dorando on May 24th, 2006, 1:13 am, edited 1 time in total.
-
- Posts: 10
- Joined: May 23rd, 2006, 12:19 pm
Buttons Archive feature and Keyconfig
I just downloaded Buttons and I am really enjoying the Archive feature. I particularly like being able to use a key shortcut to access the archive menu (using Keyconfig).
I'd like it even more if I could use different key shortcuts to move a message directly to a particular folder without going through the menu - i.e. type "A" to move to folder 1, "B" to move to folder 2, etc. Can anyone think of a way of doing this using Keyconfig or any other method or extension?
Thanks a lot!
I'd like it even more if I could use different key shortcuts to move a message directly to a particular folder without going through the menu - i.e. type "A" to move to folder 1, "B" to move to folder 2, etc. Can anyone think of a way of doing this using Keyconfig or any other method or extension?
Thanks a lot!
-
- Posts: 103
- Joined: December 4th, 2004, 12:32 am
Hi,
is there a way to execute a command currently hold in the clipboard?
I'll try to explain with a example:
I'd like to define _one_ hotkey that performs different commands depending on the which command is currently copied to the clipboard:
Assumuing ? would be the hotkey this should work like this:
current clipboard content: alert("Hello");
hitting ? would execute alert("Hello"); -> showing Hello in an alert box
if the current clipboard content would be: alert("World");
hitting ? would execute alert("World"); -> showing World in an alert box
if the current clipboard content would be: goDoCommand('cmd_saveAsFile')
hitting ? would execute goDoCommand('cmd_saveAsFile') -> saving the currend message as draft
This would help testing commands and make it easier to automate things using external script languages like autohotkey.
Regards, Toby
is there a way to execute a command currently hold in the clipboard?
I'll try to explain with a example:
I'd like to define _one_ hotkey that performs different commands depending on the which command is currently copied to the clipboard:
Assumuing ? would be the hotkey this should work like this:
current clipboard content: alert("Hello");
hitting ? would execute alert("Hello"); -> showing Hello in an alert box
if the current clipboard content would be: alert("World");
hitting ? would execute alert("World"); -> showing World in an alert box
if the current clipboard content would be: goDoCommand('cmd_saveAsFile')
hitting ? would execute goDoCommand('cmd_saveAsFile') -> saving the currend message as draft
This would help testing commands and make it easier to automate things using external script languages like autohotkey.
Regards, Toby
-
- Posts: 103
- Joined: December 4th, 2004, 12:32 am
Why wouldn't I be able to copy an email address if I use the clipboard? I'd just need to make sure there is an command in the clipboard before I hit the hotkey.
An command prompt extension would be a good thing as well but it would still be a bit more of a hassle using external tools to execute tb commands: you have to make sure the window is open,...
An command prompt extension would be a good thing as well but it would still be a bit more of a hassle using external tools to execute tb commands: you have to make sure the window is open,...